Stan's No Tubes Tubeless Ready Rim Tape | 10 Yards | Various Rim Sizes

History

In 2001, Stan’s NoTubes developed a method to replace inner tubes with a liquid sealant to repair punctures instantly. With the removal of the inner tube, off-road riders also gained increased traction, control, and comfort.

Description

Stan's Yellow Tape is designed to work with tubless-ready rims and wheels.

If you'll be inflating your tyres to 45psi or less, one layer of yellow tape in the bed of your rim is all you need for most rims.

For road tubeless and similar tyres that require more than 45psi of pressure, a double wrap of tape is required.

Features

Creates durable, airtight seal over spoke holes

Completely non-porous vapor barrier seals rim interior from moisture

Natural gum rubber adhesive sticks where and when you want it to but leaves no residue

Low friction surface helps tire beads slip into place

WHAT IF I HAVE AN OLDER RIM?

The BST (Bead Socket Technology) profile developed by Stan's NoTubes was a departure from traditional bicycle rim design, and its core concept is the basis for the vast majority of "tubeless-ready" rims and wheels on the market today. Stan's Yellow Rim Tape is not, by itself, a tubeless conversion for older, traditional, non-"tubeless-ready" rims. These older rims require the use of a Stan’s NoTubes Rim Strip (now discontinued) to re-shape the rim bed to achieve a safe, secure tubeless setup. While we would recommend considering a new tubeless-ready wheelset in place of a rim strip conversion, Stan's Rim Strips and kits may still be available at your local bike shop and can be used to convert vintage bikes with older, non-tubeless-ready rims. Using only Yellow Rim Tape and Stan’s NoTubes sealant on a non-tubeless-ready rim can result in not only difficult inflation during set-up, but catastrophic "burping" issues while riding.

Sizes : 

Stan's 21mm Rim Tape is recommended for rims with an internal width of 17-20mm. 9.14m x 21mm 10yd x .83in.

Stan's 25mm Rim Tape is recommended for rims with an internal width of 23-25mm. 9.14m x 25mm 10yd x .98in.

Stan's 27mm Rim Tape is recommended for rims with an internal width of 25-27mm. 9.14m x 27mm 10yd x 1.06in.

Stan's 30mm Rim Tape is recommended for rims with an internal width of 28-30mm. 9.14m x 30mm 10yd x 1.18in.

Stan's 33mm Rim Tape is recommended for rims with an internal width of 31-33mm. 9.14m x 33mm 10yd x 1.30in.

Stan's 36mm Rim Tape is recommended for rims with an internal width of 34-36mm. 9.14m x 36mm 10yd x 1.41in.

Stan's 39mm Rim Tape is recommended for rims with an internal width of 37-39mm. 9.14m x 39mm 10yd x 1.54in.