Default Currency
Euro
Australia
United States
China
Japan
Norway
India
Hong Kong
Canada
Product Description
Effetto Carogna Double Sided Tape For Tubular Road/CX Tyres All Sizes
Effetto Mariposa was born in 2007 with Giustaforza, the first torque wrench specially designed for cycling. Why did we do it? Because we think that every bicycle equipped with high-end components deserves a professional maintenance, with professional tools. After more than ten years, Giustaforza is still the benchmark in the industry.
Another example? Caffélatex, the first foaming tubeless sealant with no ammonia, was born from our lack of satisfaction for the products already on the market, and we wanted to offer a better sealant with winning features.
Caffélatex has been improved and enhanced during the years and now is one of the best selling bicycles sealants worldwide.
These two success cases show our approach to every new product: start from a practical need or issue, comprehend it in full, analyze the possible solutions and create our best answer.
Effetto Carogna Double Sided Tape For Tubular Road/CX Tyres All Sizes
Carogna double sided adhesive tape for Tubulars bridges the gap between previously existing tapes and mastic in terms of gluing performance and heat-resistance.
• Extremely easy to use compared to mastic.
• Very reliable adhesion, in any condition.
• Once removed, Carogna leaves the rim ready for the next gluing, without additional cleaning.
• Works for Road and Cyclocross.
• Also available in very convenient Shop Rolls.
Why We Created It:
We started developing Carogna (pronounced “car-own-ya”) double sided adhesive Tubular Tape with a clear and ambitious goal: to bridge the gap between previously existing tapes and mastic in terms of gluing performance and heat-resistance, while retaining all the advantages of tapes.
In addition to this, we gave specific additional consideration to Cyclocross and MTB Tubulars, where specific features are needed from the gluing standpoint.
Universal Performance:
Carogna has been tested and is designed to perform flawlessly on any rim material (Aluminium, Carbon), with any Tubular (seamless, handmade, vulcanized sew-ups…), on and off-road.
Specific Adhesive Properties on Rim and Tubular:
Two Application-Specific Sides:
Semi-structural and removable on the rim-side: adhesion is guaranteed by industrial-grade acrylic glue, native to the base tape; this means that when removing the Tubular (breaking its bond with the rim), the acrylic glue will stay on the tape, not on the rim. Acrylic has a good adhesion on both Aluminium and Carbon without any specific surface preparation.
Permanent on the Tubular Side:
There’s a 1 mm-thick layer of a recently-developed permanent glue for underwater applications. This thick glue film will move and spread when the Tubular is first inflated, ensuring optimized contact with any Tubular base tape geometry. Humidity is obviously not an issue, and this glue adheres well to any kind of base tape material (nylon, cotton, poly-cotton) or external finishing (raw, brushed, or coated by neoprene).
Wide Temperature Range in Use:
Once adhesion is set, the use at low temperatures (down to -40°C) is not a problem. Thermal resistance of all materials used in the manufacture of Carogna was a high priority: Carogna will provide a perfect bonding at 150°C for extended periods (hours), exceeding the heat-resistance of even the best mastics and widely exceeding the heat-resistance of any other Tubular Tape.
Optimized Adhesive Surface:
Adhesion is very strong and uniform across the whole circumference of the rim for all Tubulars and it is also uniform across the tubular base tape. One short-coming of tubular tape to-date has been limited adhesion at the edges of the base tape or in the centre of Tubulars with a raised centre seam. Carogna solves these problems.
Temperature Range When Mounting:
Ideal thermal range for application of Carogna is between 21°C and 38°C (70 to 100°F), allowing 8 hours to reach 80% of the adhesive strength . Applying the tape below 10°C is not recommended. We recommend cleaning surfaces (rim and tubular base tape) using iso-propylic alcohol or mineral spirits.Carogna tape has two application-specific type of glues:
Semi-structural but removable on the rim-side:
adhesion is guaranteed by industrial-grade acrylic glue. When removing the tubular (breaking its bond with the rim), the acrylic glue will stay on Carogna tape, not on the rim. Acrylic glue has a reliable adhesion on both aluminum and carbon.
Permanent on the tubular side:
1 mm-thick layer of high-viscosity, permanent glue (originally issued for underwater applications) will plastically deform and adapt to the tubular base tape shape when the tubular is inflated, ensuring an optimal contact surface for gluing. This glue adheres well to any kind of base tape material (nylon, cotton, poly-cotton) or external finishing (raw, brushed, or coated by neoprene).
Effetto Carogna Primer aslo available : https://sprockets.uk.com/effetto-eau-de-carogna-tubular-base-tape-adhesion-primer-great-for-cyclocross/
