DMR V8 v2 Pedal Servicing Tool
Out of our base in the British countryside, DMR Bikes has been designing and creating some of the best Mountain Bikes, dirt jump bikes, pedals, frames and components for over 20 years. From the iconic V12 pedal to the legendary Trailstar, our team of riders and designers continue to work with some of the sports biggest names to create products that will endure the riding we all know, do, and love
DMR V8 v2 Pedal Servicing Tool
The DMR V8 v2 Service Tool is designed for servicing the Dual Bushing bearing system found on the current V8 pedal with grey plastic end caps.
This tool now includes a 9mm socket.
Use this thin wall Cro-Moly Steel socket with a 13mm spanner to ‘back off’ the 11mm base nut against the 9mm lock nut on the end of the axle to adjust the pre-load on the bearings.
Tools required to service or adjust V8 Dual Bushing pedal:
• 15mm spanner or 6mm allen wrench – to remove pedal from crank arm.
• Pick - to pop off end cap.
• 9mm Socket - to adjust lock nut.
• 13mm Spanner - to adjust V8 service tool.
• DMR V8 Service Tool - to adjust 11mm base nut on axle against lock nut.
• Small Flat Blade Screwdriver - to hold/jam 9mm lock nut when adjusting base nut.
All products are sourced from official importers and covered by manufacturers warranty. If you do need to send items back to us please make sure that you retain proof of postage in the event that it is needed. Please feel to contact us on 01304 840673 or email us at info@sprockets.uk.com
Your product is covered by a 12 month Warranty or more if you opted for the extended warranty. Make sure you register your product.