Campagnolo 2011-14 Super Record Ultra Torque 11 Speed Chainset Titanium Axle
Shifting to "higher quality"; the new chainrings have 8 pins to lift the chain and 2 to lower it.
This whole re-designed system makes shifting from one chainring to the other very fast and efficient.
The result: faster and more precise shifting than ever before, a huge step forwards compared to the past.
CULT(TM) bearing technology guarantees a smooth and efficient pedaling action and a long lasting performance.
For those who only want the best and look for unique and exclusive components, the central pin crank set and titanium fixing bolts will offer a very unique bike.
full-carbon unidirectional-multidirectional cranks
hollow cranks (Ultra- Hollow(TM) Structure)
light alloy fixing bolts
light alloy chainrings with XPSS(TM) (eXtreme Performance Shifting System)
chainrings with hard anodization treatment
8 pins on the large chainring
CULT(TM) bearings (Ceramic Ultimate Level Technology)
integrated ULTRA-TORQUE(TM) semi-axles
Weight: 585 g
LIGHTNESS, RIGIDITY, SIMPLIFIED ASSEMBLY AND MAINTENANCE: ULTRA-TORQUE™.
THIS IS CAMPAGNOLO'S ANSWER IN THE INTEGRATED CRANKSET SECTOR.
AFTER MORE THAN 10 YEARS SINCE ITS INTRODUCTION THE ULTRA-TORQUE™ SYSTEM, IT IS STILL CONSIDERED, THE BEST PERFORMING CRANK-SET SPINDLE IN TERMS OF STIFFNESS, LOW WEIGHT AND EFFICIENCY OF POWER TRANSMISSION.
Campagnolo found a way to permanently conjoin the semi-axles of the bottom bracket to the respective crankset arms. This redesign made it possible to considerably reduce the lateral dimensions at the axle level and prevent annoying contact with the ankles when turning the pedals.
Assembly is simplistic: one single oversize bolt is enough to integrate the two semi-axles. With regard to torque transmission efficiency, this system is equally as effective as a single piece axle.
Furthermore, despite the narrow side profile, we have been able to position the bearings outside the bottom bracket shell, resulting in greater axle rigidity from the increased axle diameter. This breakthrough was obtained by using an ingenious mechanical system derived from many years' motoring experience in the rotation axle and engine shaft coupling sector: the Hirth joint.
In short , this is a joint with self-centring and self-aligning frontal teeth located in the middle of the bottom-bracket
axle where the ends of the semi-axles, integrated with the crankset arms, come into contact.
Campagnolo Codes :
FC12 SR040CT 170mm 34/50
FC13 SR062CT 170mm 36/52
FC13 SR562CT 175mm 36/52
FC12 SR540CT 175mm 34/50
FC11 SR293CT 172.5mm 39/53
FC11 SR593CT 175mm 39/53
FC11 SR793CT 177.5mm 39/53