Campagnolo FC11 Centaur 10 Speed Carbon Power Torque Chainset In Black
Campagnolo Centaur such as a Swiss movement.
The rigidity values of the peak Tretkurbelarme and the Philosopher chain rings, an amazing invention that literally finds, which always ensures a maximum power transmission. But not only the.
Thanks to the shape of the teeth and the 8 zones Hochschalten allow an extremely quick and accurate gear Rgang with the derailleur. + MPS (TM): The perfect combination between the teeth on the front chain rings, chain and the front derailleur.
A perfectly synchronised system that will a rapid and precise gear switching allowing the Umwerfers even under load. + Power Torque System bottom bracket: allows efficient transfer of power without loss of energy).
The Power Torque System represents the ideal solution for the new Campagnolo 10x drivetrains: high degree of rigidity in cranks and chainrings along with extremely limited weight, efficient power transmission thanks to optimised "Q" and "U" factors.
+ 8 sections for the spin up, spin and 2 areas for down the block the chain: Higher Speeds, Greater Precision even when gear switching under load
Weight: 640 g.
Ladies and gentlemen, meet Power Torque System™.
This time, the axle is in a single piece firmly fixed to the right pedal crank of the crankset. The perfect coupling between central pin and pedal crank is ensured thanks to the particular geometry of the two components; this solution also makes it possible to eliminate the potential play between the different materials.
To make the bottom bracket more efficient, we also worked on the inner part. Thanks to an elaborate sequence of thicknesses, we were able to obtain an incredibly light axle while offering an absolute response in terms of rigidity.
Thanks to the studies conducted by the Campy Tech Lab engineers, material was removed in the zones that could be lightened but at the same time the points of maximum stress were strengthened. Only in this way was it possible to achieve such a high technical value.
A careful working out of the dimensions made it possible to maintain the lateral measurements already defined with the "elder brother" Ultra Torque™, thus guaranteeing the maximum freedom of movement and reducing the possibility of contact with the shoes.
The Campagnolo engineers concentrated on ensuring that installation and servicing would be extremely simple. The most complicated work has been done, so now it''s up to you to carry out four simple steps to fit the Power Torque System™ crankset quickly and with no potential for error.
The right-hand bearing is already locked in the axle in correspondence with the crankset; the other is pre-inserted in the left-hand cup. No special tool is required, and the new crankset is ready to propel you over endless miles.
That''s right, because another one of the objectives of the Power Torque System™ project was prolonged operating resistance. The tests conducted by the Campy Tech Lab were very exacting in this regard.
Now it''s your turn.
Campaganolo codes :
FC11 - CE040C Centaur Carbon 170mm 34/50
FC11 - CE240C Centaur Carbon 172.5mm 34/50
FC11 - CE093C Centaur Carbon 170mm 39/53
FC11 - CE293C Centaur Carbon 172.5mm 39/53
FC11 - CE593C Centaur Carbon 175mm 39/53